How To Use Manual Mode Camera Settings For Photography

Manual Mode of the camera is something that scares a lot of people. You will have full control of your camera when you put your camera in manual mode and start manually adjusting Aperture and Speed.

In viewing the viewfinder, you’ll make the speed and aperture changes on your camera, and you’ll see a line similar to the one below that will tell you when your exposure is correct. That is when the arrow inside the display stays at “0”, it means the camera understood that this would be the best light according to the reading of it. https://skylum.com/blog/photography-cheat-sheet-manual-mode-camera-settings are great as the camera is compliant to whatever you want to do it with.

Tips On How To Use Manual Mode Camera Settings

  • If it’s a landscape, I’d probably choose between f / 11 through f / 16, because that aperture gives me a good depth of field, so everything is crisp.
  • Start by adjusting the Speed until the camera tells you it is correct. That is when the arrow inside there points at “0”. This is the theory, you choose an aperture and adjust the speed, so your exposure is correct.
  • After that, check to see if you are satisfied with the result. If not, I make some necessary speed adjustments for more or less.
  • Take another picture with the combination of different settings if you think the picture is too light or dark. The correct exposure should always be at “0”, but sometimes the cameras do not understand very well and the picture may get a little darker or lighter.
  • At that moment comes your creativity and knowing what you want is very important. Many times the camera will deliver you the theoretical result, and you may not want to. Maybe you want a darker or lighter photo, and that’s not wrong.

What To Do If The Photos Are Getting Too Dark Or Too Dark

Sometimes the camera does not understand the correct light of the scene or object you are photographing. And then it happens that the camera gives you another result. In that case, you need to try to get as close to what you’re looking for and then try to sort it out in post-production, that is when you edit your photos. If you shoot in RAW, it will be easy for you to fix any exposure errors.